During the inspection, blue light is the most effective light absorbed by the leaves and then used most effectively for the first sense. You just need to burn equal amounts of red and blue on all plants, or mix them together, because this does not apply. We have developed different formulas for different crops, so we changed the red and blue mixture, which changed the taste of the plant, changed the color of the plan, changed the oil content in the leaves, changed the flowering time and changed the concentration Antioxidants. This is very clever, why can't ordinary light bulbs expand these coals, you can touch them? Yes, if the plan becomes better, they will not burn the leaves, so since you can place the lights again near the plan, you can stack more plants on top of each other, yes.
This is why we have these stacked shelves in these facilities, and I found that this smart person does not look good. The reason is that we have these facilities everywhere and save space. LED lights are more economical because it improves efficiency by 30%. Researchers even hope that their technology will eventually be 60% higher than traditional lighting technology, so you know there is not enough space, there are other reasons we should consider using this technology, because you Knowing that we will grow some grains in the future. Yes, I think we do need to study the difficulties farmers and growers encountered when harvesting the crops on the table in 2012. It has been a very difficult year for me, I don't know. Where does this happen repeatedly? I think everyone should do this, but it is not that simple, because we have a lot to learn. This is the first step into such a system.
We must find out the economic factors, because we are ourselves. The reason for setting up facilities here is that we can start to prove to the industry the true potential of the technology. I think that because of the huge scale of this kind of agriculture, it makes sense and solves many sustainability issues. There are still economic and environmental issues that need to be resolved, but I think this is long-term thinking with foresight.
]]>Can you tell me the age of these fillers and lamps? method? Now we have LEDs, light-emitting diodes or Dutch parrots here. I think this is a research field. In this area, especially greenhouse growers in the United States and greenhouse growers in the Netherlands and other parts of the country. I am very interested in this new technology. This is a very new technology. In fact, people are now beginning to invest in Michigan to make it economical. We are conducting a lot of research on light-emitting diodes suitable for plant growth. , We are tall and look very purple.
In fact, you mentioned that plants don’t actually look like them. Do they look green, so my question is how did you decide to invest in late-stage LEDs? The hat is a good ratio of red and blue light. We need to use stronger water. Why we started to use LED lights in combination with five Venuslite lights, except to illuminate them like a combination light, and after a year, they are almost the same as the floor plan. They might let me see it here. There are about two for every five red LEDs. There is a blue LED.
Without white light, there would be no green light and no ultraviolet light. Therefore, we only see a small part of the spectrum, but because the efficiency is okay, good growth results can be obtained. How efficient is the LED? Compared with fluorescent lights, T8 is better, so the efficiency is three times higher, and then you have to use LED lights for several hours a day to work for 12 hours, so obviously you must increase the efficiency by a quarter. With energy, you can get nearly four times the efficiency. Lighting system with LED can emit fluorescence better
]]>Now, I open it first and then level the Carpathian Mountains. If the data stabilizes, let's look at the screen. This is our white spectrum. About the warmth of LEDs. Starting from 3000 to 3200, we can see obvious appointment dates. The date is captured here. Yasen Green. red. One elf is not enough. The spectrogram here is very good. Of course not much, but on the contrary, the distance here 15 20 20 almost produces 7 watts of micromole per meter, but now I will open the white or even 4000 Kelvin spectrogram data, and now we will see that blue and green are added to the red area The amplitude has decreased slightly but at the same time slightly higher than 70 microwatts and 33 micromoles. The third cold data now updated is about 23 micromoles and seven and a half watts of the spectrum.
We see the date bluer here. In other words, for this type of data, you can streamline the system as you design it. There are white LEDs, but as we have already seen, interesting white LEDs increase plant light when adding a broad spectrum, because there is no clear beer, but the blue has a peak, but it is still quite a bit. We cover areas that may be interesting. Different types of plants are susceptible to orange. The green area is red. I will still reveal a little secret. Good indoor lighting, white LED has a good indication of color reproduction times, but now all content on the data device is disturbed. Reflection means, but for us, plant goals are better for me.
Under the halo, the age factor of each LED is considered very bad. Below 0, 8 below 80, they respectively have gram spectra and will shift in this area. Red will be less green, but it will be more common. But you can still use all the data in the future.
]]>No matter what you do, just tap the switch carefully to keep it engaged, which means you will deprive the plants of light so they will turn into flowers, which is another way of saying. Outside, we have about 14 hours of sunshine, and sometimes 16 hours of sunshine in May and June. This is when you want to stop the plant outside for a full cycle, so like I said, mild deprivation will cover the plant like a tarp to turn off the sun and darken the greenhouse, so you can adjust to make the greenhouse The time to dim so that it can last for 12 hours of light and 12 hours of darkness, so DEP just takes away the light, which means a lot, I don’t think many people understand it, so you know it’s six o’clock The sun was up, so I had already put down the tarpaulin at 7 o'clock, then Denise lit it up, then opened the tarpaulin at 7:12 in the evening, and it was dark for 12 hours.
This is the result you can reap. Before this season, we know that everyone knows that this is a dry time, and my Lysol is a drought in June, so the deprivation of light can indeed make us experience drought earlier. There is some work to understand, thank you
]]>I am doing traditional green crackle. I am studying "Dutch Dragon". There are some hybrids on Indian sapphire cheese, such as OGKush strawberry cheesecake, cherry bomb and so on. The best sourness of the day, we have run more than 50 different strains here, and in the past four years, we have only tested and found LED technology that cannot be used in our system. For example, the energy saved by HVAC can then be used to control the room to a greater extent, which can help us really adapt to various pressures. Before I saw anyone at VANQ Spectroscopy, they were using many different competing companies. We believe that the average price of high-quality LED lights should be about $1,000 higher than the price of things that require fancy money. In this case, you only worry that the things you buy are no longer reliable. There is basically an LED graveyard in my closet. The 3-year warranty on damaged LEDs with VANQ warranty is a good warranty. The radiator on the VANQ is really great, in fact the radiator here is huge.
You can tell us that you can save more quality because you can save money. You do not need to replace the bulbs with these diodes. You know that it takes three to five years for them to completely degrade, so you can only get the same effect as the peak lighting performance, and you can indeed get a consistent lighting effect, and you know that the product deviates from the lighting state because of the lighting. This is another thing you need to worry about. The grand plan for growing these plants does require fine-tuning of all other aspects (such as water). Agricultural system, soil system and nutrient level
]]>Reduce the light intensity to make these seedlings move more slowly, but if you are in a place with high real estate costs and limited rack space, the seedling space is limited. You want to provide more light and move the seedlings faster, so these two Important aspect. Think of a grower. You care about more space or electricity usage. For Agrotech Agrotech here, we have almost eliminated the differences, and the differences between us have almost eliminated the most, so please carefully consider the real estate cost or lighting cost that is most important to you (if you are a home grower and are small Scale planting, and you don’t do it) Really care about real estate costs or lighting costs, and then color me, usually just say it once, so I need to open it every day. You can turn on the light for 18 hours a day, or even 24 hours a day, 20 days a day, and you can move the seedlings a bit.
Now, I want to tell you that for most crops, you just don’t want to harvest more crops within 24 hours. You will be 18 years old. Well, this is the reality, 18 will usually start to maximize its growth, so usually if you plan to close them. If you know whether it’s inconvenient to turn off these lights for 18 hours a day, please make sure that there is good air circulation there and you will be very satisfied with the production, so the last thing to consider is whether you work 12 hours a day and you are in such good protection In the environment of sex seedlings, you will want to harden those seedlings that usually harden before entering the main system. This usually means getting them accustomed to lowering the humidity and accustoming them to refrigerating that kind of seeds, but basically It makes them accustomed to light. The experience I will encounter in the main system transplantation has a great impact on these seedlings, so they will be shocked and will slow down their growth. When they first entered the producer, the growth rate was not so fast. This is important because it reduces overall productivity. Therefore, you want to minimize the impact, and the way to do this is to increase the light and reduce the humidity. , To make our seedling system variables closer to the main system variables, because we are getting closer and closer to the transplanting day, so it is very important to consider this, because it may mean you need to switch the light time from 12 hours to 18 hours. The relative humidity needs to be lowered from 100% to 70 or 60 to ensure that when the seedling enters the growth system from the seedling, it will not receive too much impact.
]]>We started in a small garden center south of Minneapolis, next to a restaurant. Conceptually, everything in these two locations is produced and raised on a farm 45 miles from Prato, Minnesota.
We have greenhouses, and most greenhouses are dormant only during the year, so we think this is an opportunity to use the facility and extend the growth period. The snow and fields on the ground were frozen, we transferred energy to the inside, and we began to use the greenhouses on the ground more, because the cold shelves and high tunnels made us discover that Minnesota can produce higher quality and higher value for the local Food for 12 months a year, instead of taking it to far away, at least you have the ability to understand your own high-quality food, high-quality food, nutritious food, they know that the exciting thing about LED technology is efficacy Increased In the past three years, about 70% of crop costs have dropped sharply, and in greenhouses led, this is a controlled cultivation method.
Farmers have created new opportunities for the crop environment. When we start to pay attention to energy consumption, especially in winter, when energy costs account for a large proportion of the company, we must have a good understanding of the appearance of these inputs, and then how can we make the most of them maintain high energy consumption. There are obviously many alternatives to high-quality products on the back-end, and if we just start looking for ways to save or change the source, it will have a major impact.
Another aspect of this research area we are studying is the result of growing in a low-income environment. LED lighting. When you compare our high-pressure sodium devices, what I noticed. Under LED lights and LED lights, plants are under high pressure. Growth tends to be faster but not so strong, and the route is not so firm. Under LED lights, you tend to become more compact, but with higher density and stronger rooting. Therefore, I think the quality of plants is actually better and closer to the appearance under LED lights in daylight.
Under high-pressure sodium lamps, the powdery mildew on the LED lighting side is much smaller than that of high-pressure sodium. This shows that I think one person will definitely be healthier and stronger than others. The fact of the disease-resistant plant I think is that you can slightly adjust the wavelength, you can adjust the light according to the specific crop, and you can use different LEDs. There are more blue LEDs and red LEDs. What is the spectrum of sodium? For me, LED lights are undoubtedly the next area I definitely recommend in order to be able to grow crops locally.
This is a real victory in protecting sustainability and enabling our growers to produce and use this new technology locally throughout the year.
]]>People always ask us how to build the final growth room, we tell them the truth, it's very simple, all you need is carpentry, plumbing and electrical engineering minors, detailed knowledge of computer science, and 75 years of comprehensive development experience. Our final development space is waterproof, moisture-proof, and air-tight to maintain the ever-changing environment and the external environment.
In this way, we can maintain whatever environment we need indoors without worrying that mold will corrode the rest of the office. We use sprayers, humidifiers, dehumidifiers, ventilation equipment, and equipment that uses air conditioners or heaters when necessary to fully control the internal environment. Our ultimate growth room is monitored by a computer and can easily switch from tropical rain forest to dry desert, and watering is also easy. The filtered water can be stored and raised to room temperature and can be easily distributed into the fertilizer mixing tank. Using a series of pipes and valves, nutrients can be mixed or distributed into the hose bib, which can be conveniently placed in the machine room. Difficult to dispose of waste or spills.
Our factory room is equipped with a leak-proof self-draining floor. The floor can collect excess waste or spillage and automatically discharge it into the sewer through a sewage pump. At the same time, it filters out anything that may block the sewer, thus completely eliminating the problem in the store. Vacuum degree, mop bucket used to handle spills and excess water.
The final growth chamber of Vanq LED is high-tech, low-maintenance, spacious and of course equipped with the most powerful and proven LED growth light.
]]>The evolving technology understands the issues that affect quality and quantity, and has developed a series of new LEDs, breaking old stereotypes and setting new standards. The old-fashioned spectrum, we call it commonly known as purple light. Here, you know that the combination of red and blue LED diodes will produce this monochromatic purple light source. People think it is very useful for plant growth, but it causes a variety of plant pressure, which is a problem, but plants have not naturally developed a way to use full-spectrum light sources (such as sunlight).
Another problem is that most luminaires try to save costs through small size, which will cause problems, that is, in the indoor environment, when designing the plant canopy, it is always impossible to obtain a uniform top lighting distribution, because many luminaires are for access Designed for the interior. Greenhouse, so when developing lighting, the main criterion is uniformity, and we want to breed at 4 feet. Provide the same intensity and quality of light for all plants on the table, or use a 5 foot x 5 foot tray within 4 feet. The second thing is that we have to build sturdy industrial-grade equipment to adapt to the severe test of the reality and commercial planting environment; the third thing is that we want to let growers control their light as much as possible to adjust on the board The light and spectrum are controlled on the board so that you can move the light down to near the top of the plant canopy, so that you can maximize efficiency when many customers come to us. They first encountered some problems: I don't have space, I really want to grow more plants, I just don't have more space, and the second biggest problem is electricity. My factory only has X large amounts of electricity, I have used up everything I can't do, and their business has stalled. We provide the function of turning square feet into 100-foot rooms, which can now be stacked in multiple rooms, which can turn square feet into cubes. The footlights are superimposed on each other through the rack system. If you rely entirely on electricity, our lamps can only increase energy consumption by 40% through 100% energy consumption, and then consider dimming and HVAC savings, you can save 50% of energy consumption and 60%. People will be surprised that lighting is easy To use and give your impression, you need to change the entire growth method to use um and Ithink LED lights.What I want to say is that our customer service is second to none among most LED manufacturers, I don’t want to talk about disposable shoe polishers, but they want their customers to put in a lot of effort to understand how the platform should work and work, Their environment and our success, so we have unparalleled customer service, we know that customers must use our platform or platform advantages to succeed, now we know that you want to share with the world the knowledge we learned when designing the world, level Of lamps and how to honestly increase production by 50% or more and reduce energy costs by more than 50%, I think protank is the gold standard for innovative LED horticultural products that we work with our customers. Considering the desire to reduce consumption, our desire does have an impact on our world.
]]>They are almost the same, but in different configurations, Class T is a measure of bulb diameter. Generally speaking, the lower the T number of the one-eighth bulb, the more suitable for plant growth, and the lower the T grade of the bulb, the more likely it is to be effective. Convert energy to photosynthesis, in this case, I will choose t8 bulb instead of t12let to convert to lumens. It describes the amount of visible light reaching a square meter area. This is because the blue and red spectrum commonly used by plants cannot be represented well in visible light. This device is not as useful as other devices when buying a girl’s wattage, which is obviously the power consumed by the bulb when it is selected and converted into light. The rule of thumb is that the higher the wattage, the better the plants will grow. The Kelvin level or color temperature is very important for growing plants. The sun emits a broad spectrum of light. , But the role of fluorescent lamps is very limited, and photosynthesis usually only occurs at one or two wavelengths, and photosynthesis is the most effective use of two wavelengths to grow 6,512 Kelvin (Kelvin) statement. Plants cannot use other wavelengths because the 6500 and 2100 wavelengths are converted to sugar at a much higher rate than other wavelengths. Fortunately, most fluorescent tubes do not have a Kelvin rating on their packaging, but if you choose a lamp, they will usually have a color temperature.
It is marked as a warm glow, usually around 2100 Kelvin, while cool white is usually around 6500. I changed the bulb to between 6500 and 2100 this year. I bought two bulbs of about 6,500 and two bulbs grown in the Phillips factory. It is said that they can shorten the wavelength of light by nearly 215 and 650. After choosing the bulb, it's time to choose a ballast or ballast. I usually look for ballasts that have reflectors and are rated for t8 bulbs. Fluorescent lamps emit light equally in all directions. The reason I like to use these reflectors is because the light emitted initially leaves the plant and then reflects back to the plant. Similarly, if there is a wall behind you, it is white, it will reflect light more effectively, and then a mirror can improve the efficiency of photosynthesis overall by installing at least a little. The light of the miniature shelf is very simple. I chose some screw mounts so that I can pass through them to support the light, and can easily increase and decrease the brightness of the lamp, because these mounts must bear a certain amount of weight to ensure they can be placed, which is very important. Relying on the bracket, and at the same width and position, I pre-drilled some places to install them on the depth of the shelf surface. The screws still need considerable weight to support the weight of the bulb.
I have installed four of them to help balance the entire shelf. In Canada, I bought four best led grow lights for cannabis for this special project for 29 US dollars and 41 US cents, while in Canada, the price of the bulb is 69 US dollars and 98 US cents. The total monetary cost of the project is US$9,939, while the cost of using the same system in the United States is approximately US$89,85. I quoted in U.S. dollars last week. I estimate that this dual-shelf system will produce plants worth between US$96 and US$160. The cost of adding a shelf is 8454. The total cost of this special project is 183 93, and the amount to be repaid in the two growing seasons is just over one. Because if you want to learn more about the evolving lighting technology, or want to learn more about the technology, then this setting will help me grow in the coming winter.
]]>If you want to replace the bulb, you know every two to three, but the bulb is used up because the bulb is degraded, yes, yes, you know that 10% to 15% after the first grill is absolutely fine, and In terms of quality, we should have a certain understanding of Waterproof LED Grow Light s, so LEDs do not need to have rich infrared light like HPS and HID lamps, so caterpillars can develop normally without being bombarded by all infrared radiation. Big. I know that some people still use traditional HID. Maybe we can talk. Even LED lights have some advantages. It is becoming more and more popular. The secret to whether you can provide us with the advantages and disadvantages of using HID is that they will bring you closer to the heat of the sun because it can heat your residence well.
Greenhouse LED Grow to Light the difference between hidden and LED is mainly that HID lighting works are as good as floodlights, while the mainstream htps bulbs of LEDworks are three-point lightning, three hundred and sixty degrees. You know they will raise the deflector and then fall to your Body. Cover, so you will lose about 45% of the light, and the LEDs are omnidirectional, and they will be directly under the cover you are interested in, I heard some information about light penetration, I don’t know if we can discuss this Question, I think for people who don’t know HID, HID is a high-intensity discharge lamp, so they are actually the traditional bulbs of HPM HPS that you see most often. Popular combination, but we will also use CMH, which is also very interesting.
Yes, what you want is something that transmits light, which may change people’s minds and use HID instead of LED. Yes, yes, you have to know that there is a stain, that is, the LED cannot penetrate the lower part of your machine cover. Because you need a spectrum to make the green and blue light penetrate the lower cover. Many people say that the green light does not refer to plants that do not use the green light, but this is wrong. Plants use 9% less green light than any other color.
]]>Now let’s start with high-quality old-style HID HID lamps or high-intensity discharge lamps, which is definitely the traditional choice, and growth lamps. These lamps mainly have two growth metal halide lamps and high-pressure sodium lamps, which now have a cold spectrum or blue spectrum The task of the metal halide lamp is suitable for high-pressure sodium lamps for plant growth or heating lamps for high-pressure sodium lamps and is now suitable for the red spectrum of flowering plans. Unless these lights work properly, no one will. The large amount of light produced by these bulbs contains an intensity spectrum suitable for plant growth, but this light intensity comes at a price.
As we all know, HIV generates a lot of heat, which is why other components are often needed in the equipment that uses them. Causes of heat generation. To make them a viable option, these projects now include ballasts to regulate the electrical output from the source hood to wrap the lamp itself, as well as built-in fans and air ducts to cool the lamp. The most common case is to use some type of air The equipment cools the room to the right temperature, and now the original cost of buying all these items and the operating costs of running all these components can make the installation very complicated, which means it may take some time to dial each component in the room The merge work is even, so the final output is temperature. This is ideal for increasing the variables we need to consider. The ambient temperature of the room containing the room continues to increase, the air volume of the fan, the cooling capacity and settings of the air conditioner, and of course the lighting itself, once a good balance is achieved, you will get good results, but this still allows you to increase all The energy consumption of these ingredients will hardly cause you any inconvenience. The HIV setting requires that the bulb be changed from a metal halide bulb to a high-pressure sodium bulb from the plant growth period to the flowering period, but a replacement bulb must also be purchased each time. Because of their short life, these lamps rarely increase.
Now, relative to new technology growers, talking about LED light-emitting diodes or LEDs is a type of light. New technology growers are polarizing this technology. LED users who have experienced a sharp decline and made great achievements have benefited greatly from it. But other people refuse to try or have different experiences when testing them. Some of the reasons for this situation are the hesitations we often encounter, because growers may be satisfied with the light they use. If the light does not break, please do not fix it at a level, it makes sense, but When you consider all the inefficiencies of HID lighting, you must realize that this is not an ideal solution. Another reason we encountered is that growers tend to classify all LEDs into a single category. As HID tried, we can all understand the trend of doing this, but the reality is that this idea is not consistent with the facts. There are too many differences between a leading company and later companies, and it is easy to compare the power design differences between the products they produce and the spectral diodes between apples and oranges. Amplifying the drive current for a placeholder, to name a few, will greatly affect its effect. If growers buy improperly by buying cheap imitation LED lights, then your precious plants will perform poorly on the whole and blame all LED technology on the poor harvest, which is easy to understand because how to induce consumers to buy inferior products , These products have a lot of technical information about night LED companies and competitive lighting technology companies, that is to say, it is difficult for buyers to do this.
Know who or what you can trust, we will try our best to help you eliminate the haze in this video. From a technical point of view, those LEDs that have entered the market have obvious advantages. Their useless power is cooler than traditional bulbs. Longer lifespan, this alone is enough to influence your decision, but this technology needs to be applied in the right way to have a truly positive impact on your plants, not all LED growth lamps are manufactured And, there seem to be many such plants in the market that seem to ignore the high-quality LEDs that factories really need to thrive. The advantage is that these diodes can be targeted.
Photosynthesis spectrum Including visible light and invisible light. LED panels can contain a certain number of diodes in each color or wavelength, so they can be perfectly adjusted to absorb the exact proportion or number of these wavelengths to form the spectrum that plants will absorb and utilize. This means there is almost no wasted light, you can get a very efficient growth system, you can get amazing quality results by providing your plants with exactly what you need, and you don’t need to look at the spectrum comparison table to understand How to get the spectrum.
The most perfect spectrum harvested from our factory is a waste-free spectrum. By observing the comparison table between the LED and HID lighting options, we do see a lot of light emitted by the HID bulb, but a closer look shows that there is a lot of light energy in the green and yellow areas. Although the spectrum rarely uses plants, it is the least used. The photosynthesis in this area is caused by hyperspectral and HIV bulbs, but the actual measurement units required by plants are completely unreliable, so it is easy to ignore plants. Operating costs continue to increase because they appear on your energy bill once a month, so if you need to be like me, you usually pay these costs as you grow, but in reality, these costs can be very Big, affect your productivity and profitability. ROI, you cannot ignore these costs.
The average life of LED lights is about 50,000 hours. It works 12 hours a day. It has been running for more than ten years. Now, it is a typical HID bulb. It takes about 7 to 10,000 hours, which can make your growth time up to one and a half years. Last but not least, LED lamps have a lower operating temperature, which frees you from the growing demand for other cooling components. need. This room made us talk about not wanting to talk about Monday’s return on investment. Now, when you compare the results of LED and HIV growth, you may get similar results. When talking about profits, this is probably the most common mistake in measuring success. Now, when considering operating costs and listed output, you want the average power per watt to be less than 1 gram of factory products from the leading HID brand, while the average power of LEDs from leading Cob LED grow light manufacturers is about 1.4 grams per watt.
]]>Oregon's Marijuana plant Marijuana cultivation has been legalized for 20 years, which means that the cultivation of eddyfootin Ellis for medical Marijuana patients began building a phantom farm in 2008. Before that, he learned how to grow Marijuana with little trial and error. I really don't know what I am doing. I started growing plants when I was 12 years old. My grandmother used to grow roses, like a bag of blood powder and bone powder. I just threw them into these positions. I don’t know what to do, but it actually proved to be good or legal in 2015. Casual Marijuana. On the Nellis farm, employees like Connor are now lucky enough to help the Himalayas project, so I mean in southern Oregon, yes, we have beautiful summers, and usually, we have big waterfalls.
Did you know that growing Marijuana is a good climate, but at the same time, it rains very early, and humid springs can damage pests and Marijuana mold, but it can damage plants, but Footin Ellis and Lucky plan to spray essential oils that pre-plant plants can repel pests, We use pepper, we use lemon, we use all kinds of cinnamon and cinnamon powder just agreed, but the taste of mint happens to be mint, so we are already making this pesticide, and then we try to cover the leaves with essential oil to prevent bats The ship developed further? Another way to prevent pesticide hazards is to grow them by feeding healthy plants. All the nutrients required by the Marijuana plant when traveling are the same. They excrete hormones and track important nutrients from past farms. Other plants are dynamic. The dynamic accumulator comes from the dynamic accumulator. It is a plant that accumulates in the micro and macro range.
I chopped up, nutrients will fall to the root area at the end of life. He will take root on the ground, then spit out all the remaining high-quality nutrients, and then start to grow new growth food and replant it to Nellis, which also ensures that there are enough creatures on the farm to eat all the insects that appear, This will increase the number of hungry zoos he buys and releases predatory insects, such as pirate bugs and bright orange predatory mites (called similes). The torches there are very cold, you can see them in the bottle, then let go of them, just like the barbarians, they starved to death, they can be seen running on the plants, yes, this is crazy, their overall The goal is to do a lot of things to eat closed doors and build cars, that is to keep the closed-loop, we think we can make everything as organic as possible.
]]>Currently, high-pressure sodium lamps or HPS lamps are used in horticulture and greenhouses. Their investment cost is very low, but you cannot adjust the quality of the bulb, they will become very hot to 300 degrees, which means that if the bulb is too close, the plant may burn. Horticulture LED lights, light-emitting diodes, or LED lighting are the latest technology. They can provide high-quality light with customizable intensity directions and color settings and low brightness. The surface temperature is higher than the HPS lamp, so it can be used for crop canopy agriculture and agricultural food. Canadian experts have specifically developed a new hybrid lighting system that uses HPS lamps above the crop canopy and LED lighting in crop canopy agriculture and agrifood.
Canada is one of the world’s leading organizations for this research. The results of the vertical lighting distribution in the greenhouse indicate that the new system can increase the yield and nutritional value of greenhouse crops. They found that by using an optimized hybrid lighting system, they can provide the appropriate spectrum at different heights. The yield of the mini cucumber plant is twice that of the original cucumber. They are studying vegetables in a traditional color greenhouse, which is more than 20 times the field vegetables. They are also studying the effect of different colors of Greenhouse Grow Light on antioxidants in greenhouse vegetables. Blue light increases the content of polyphenols and helps protect plants from insects and insects.
On the other hand, the red light of the disease increases carotenoids, which is very beneficial for plant growth and leaf health. The results of these studies may enable Canadian greenhouse growers to overcome the Canadian winter and enter a full 12-month production cycle so that they can produce fresh vegetables throughout the winter to meet consumer demand for high-quality local agricultural products nearby. they. This will also make them more competitive because, with the help of Canadian agricultural scientists, they will be able to reduce their imports in the winter and expand their impact on the international market.
At the right time and in the right light, the sun never stops shining on greenhouse growers in Canada, everything is extraordinary
]]>Now let us talk about another important aspect of plant growth. The growth of lighting plants requires water and nutrients. The quantity and quality of each plant will affect your plant growth. when selecting lighting equipment, we will give it to you to form your own professional opinion.
Four of them are usually used for plant growth. What is the difference between Marijuana LED Grow Light, high-pressure sodium vapor HBS lamps, compact fluorescent lamps, CFL and metal halide lamps, and why are they so important? All these lamps have three main characteristics. The process of choosing to help them grow plants will depend on how many plants you have and the growing environment.
The three main characteristics are the intensity of light, the spectrum and the heat they emit. Therefore, LED and CFL lamps are the coldest and have the lowest brightness. For newly germinated seed plants, this is a good choice because you don’t want to dry them in the first few days, you can hang them above the seedlings after the plants have matured, and then choose between brighter and warmer. It is generally believed that it is best to start the plant under a metal halide lamp, because the blue spectrum is conducive to multi-leaf growth, and then switch to the HPS lamp. When you want the warm red spectrum to eventually promote flower growth, you need to consider that the more heat generated, the higher the cost of light generation. This may mean a lot of electricity bills and may require some explanation to explain.
Do you have any other ideas about which bulb is best for use and why you should contact us in the comments below?
]]>